• High-power 75C/150C cells for exceptional performance.
• Latest 2023-Spec Silicon-Graphene Lithium-Polymer Cells for improved internal resistance and higher power output.
• Low internal resistance for maximum power delivery to your race car.
• High capacity for longer run times and fewer battery changes during races.
• Lightweight construction for improved handling and agility of your race car.

 

Specifications:

- Capacity: 4400mAh

- Nominal Voltage: 7.6V | 2S | LiHV

- Discharge-Rate: 75C/150C

- Cell Type: Silicon-Graphene Lithium-Polymer

- Length: 95.5mm

- Width: 46.5mm

- Height: 18.5mm

- Weight: 160g

- Plug: 5mm

- Balancer-Plug: 2mm

 

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

We recommend to use a lipo bag during charging your battery: https://www.ruddog.eu/RUDDOG-HD-LiPo-Charging-Bag-180x80x80mm

Installation:

When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: https://www.ruddog.eu/RUDDOG-30mm-Aluminium-HV-High-Speed-Cooling-Fan and https://www.ruddog.eu/RUDDOG-40mm-Aluminium-HV-High-Speed-Cooling-Fan

RUDDOG batteries come without battery plugs. If you do not already have the right plugs, you can find a wide range of plugs here: https://www.ruddog.eu/Stecker